Truck Accessories

Weld-On Webbing Winches

Weld-on winches are designed to be permanently mounted in a fixed position.

Portable Webbing Winches

Portable winches allow total flexibility of winch placement along the trailer side channel. Portable winches are also available with set screws.
Warning: Set screws on portable winches should be snug tightened only. Overtightening of screws may cause bracket to bend, weakening the winch and causing it to fail, resulting in a loss of tie-down.

Sliding Webbing Winches

These heavy-duty sliding winches move easily in both directions for poitioning, but lock firmly in place when tension is applied to webbing for a safe, secure tie-down. Sliding winches must be used with winch track. All sliding winches can also be welded in place for fixed application.

Winch Strap - 2" Webbing with Flat Hook

Webbing Breaking Strength 12,000 lbs. Assembly Breaking Strength 10,000 lbs., Working Load Limit 3,335 lbs.

Winch Strap - 4" Webbing with Flat Hook

Webbing Breaking Strength 20,000 lbs. Assembly Breaking Strength 15,000 lbs., Working Load Limit 5,000 lbs.

Winch Strap - 3" Webbing with Flat Hook

Webbing Breaking Strength 15,000 lbs. Assembly Breaking Strength 12,000 lbs., Working Load Limit 4,000 lbs.

Winch Strap - 4" Webbing with Chain Anchor

Webbing Breaking Strength 20,000 lbs. Assembly Breaking Strength 15,000 lbs., Working Load Limit 5,000 lbs.

Winch Strap - 3" Webbing with Chain Anchor

Webbing Breaking Strength 15,000 lbs. Assembly Breaking Strength 12,000 lbs., Working Load Limit 4,000 lbs.

2" Long Wide Handle with webbing

Saf-T-Bar II

Kinedyne Saf-T-Bar II can be quickly installed to restrain loads at any point in trucks or trailers. Bars are offered in either high-strength heat-treated aluminum tubing of galvanized steel tubing. Kinedyne’s patented handle design permits the Safe-T-Bar II to be secured into position before the handle is locked. In addition, operators do not have to “back off” the locking mechanism as is necessary in the operation of conventional friction bars. This bar features an easy one-hand handle release. Molded feet grip firmly to trailer walls yet won’t scuff and will remain pliable even at low temperatures.
Aluminum tube: Adjust from 87.25” to 104.25” Weight: 8.6 lbs./ 3.9 kgs.
Steel tube: Adjusts from 87.25” to 204.25” Weight: 12.1 lbs./ 5.5 kgs.

Strap-All One Inch Straps

Ratchet Strap with Ratchet, Wire Hooks and D Rings
Breaking Strength: 2,500 lbs./ 1,134 kgs

Cargo Restrainer Rubber Tension Ties

Quickly and easily secure tarps to trucks and trailers. Also adaptable to restraining lightweight cargo. Loops snap on and off instantly. No clinching. Rubber maintains constant, uniform tension. Made from the finest EPT rubber, with no filler added, these ties have exceptional ozone resistance and stretch resiliency. Body of rubber is 10% heavier than other straps. Galvanized steel S hooks are easy to secure. Head of hook is about 10% thicker than standard hooks.
Available in sizes: 10”, 15”, 21”, 31”, 41”. In box of 50. Made in the U.S.A.